Thread: Are these MAF interchangable??

Can somebody tell me if the part number for the maf GTIR 54c00 and the AVENIR part number for the maf 54c01 are interchangable,,,

Or is there a thread that you can link me to,,,,, cabnt find it . thanks

Anybody ?????????

okay,, from what i was told threw members and reading threads from 4 diffrent websites ,,, YES they are ,,

The listed part is a 54c01 (for avenir) is physically the same part (There reasoning was the 01 meant it was a new part number because the plug changed - a 54c00 will connect straight to a N14 Sr20de loom, whereas a 54c01 will need the avenir AFM plug or an N15 sr20de plug splice into the loom to fit an N14 sr20de loom)
A member from a thread did the Avenir conversion over 2 years ago , when there was alot less information around, and relied on the sr20forum.com information at the time and it seems to have been true

When its installed I will post photos and a TRUE ANSWER BY ME if it works.././.

91-94 Pulsar GTIR, part # 54C00
50mm 290 WHP-----------Bored 54mm 345 WHP,


Aveneir W10 and W11, part # 54C01
50 mm 290 WHP----------Bord 54mm 345 WHP

Found here

Looks almost the same hehe

Thanks alot for the feedbackk,,, \
hopefully this thread could help someone else whos starting to do a first time swap me.,.,. ,.,..,

Will post back when installed..,.,.,.,.

Hehe gotta start from somewhere

It's just usually easier to go with an N60, so that's why you don't get too much feedback about the GTiR one hehe