HOW TO: SE-R window regulator
step 1- remove all screws along the outside edge of the door panel
step 2- remove the plastic trip piece behind the door lock
step 3- remove the 2 screws that are behind the handle you use to close the door
step 4-remove the door handle
step 5- pull the bottom of the panel seperating it from the door
step 6- once it is free tilt it out and pull it upwards, i found that it is easier to do with the window down
step 7-place door panel in safe place
step 8- carefully remove the plastic on sheet on the door
step 9-locate all the bolts holding on the regulator
step 10- lossen all bolts that hold the regulator on the door
step 11-roll up the window till you see the base of it inside this open space and remove the 2 10mm bolts that hold it to the regulator. let the window drop after you unbolt it
step 12- remove the rest of the bolts and pull the assembly out of the door.
more pics and details will be updated shortly
step 2- remove the plastic trip piece behind the door lock
step 3- remove the 2 screws that are behind the handle you use to close the door
step 4-remove the door handle
step 5- pull the bottom of the panel seperating it from the door
step 6- once it is free tilt it out and pull it upwards, i found that it is easier to do with the window down
step 7-place door panel in safe place
step 8- carefully remove the plastic on sheet on the door
step 9-locate all the bolts holding on the regulator
step 10- lossen all bolts that hold the regulator on the door
step 11-roll up the window till you see the base of it inside this open space and remove the 2 10mm bolts that hold it to the regulator. let the window drop after you unbolt it
step 12- remove the rest of the bolts and pull the assembly out of the door.
more pics and details will be updated shortly