Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Twinscroll + Dual Plenum intake manifold + vertical flow sr20det ***photos***

+ Reply To Thread
Posts: 11-20 of 28
2017-05-03 23:19:11
#11
That's some very impressive things you've done there. Excellent work!
2017-05-03 23:40:31
#12
I concur.
2017-05-04 02:19:04
#13
Oooh I just saw this car in TX at the convention last week...That mani is sick! Nice work
2017-05-04 04:23:11
#14
I was really hoping for a dyno competition at that Event! I had actually only had it tuned the day before and drove it 200 miles with no bumper, open loop on accident and open downpipe. The judges didnt give me any love hahaha


Thanks for the comments guys. Its going to be fun to push the potential of this engine and platform. Im still getting 30+ MPG with multiple pulls a day and my intake air temps have been amazing, dyno never saw over 115 degrees in a 90 degree room. I just built a quicky intake with a mushroom filter and still need to bust out a catch can even though it doesn't smoke.

Due to the radical nature of the intake manifold my throttle enrichening needs a little work, other than that its a real blast to drive!
2017-05-04 04:43:12
#15
this build is dope
2017-05-04 12:33:46
#16
THAT MANIFOLD!
2017-05-04 13:54:42
#17
Was that on stock cams ? Nice !
2017-05-04 14:18:03
#18
Bone stock unopened jdm sr20det doing work!

Actually looking into tomei cams to replace the stock ones as power falls hard after 6000. Need something to carry the power better with e85 and 30psi lol
2017-05-05 04:53:25
#19
Are Jwt S4, C1 or C2 an option for that build?

Sent from my SM-G530T1 using Tapatalk
2017-05-06 16:11:30
#20
Originally Posted by VinceFab
I was really hoping for a dyno competition at that Event! I had actually only had it tuned the day before and drove it 200 miles with no bumper, open loop on accident and open downpipe. The judges didnt give me any love hahaha


Thanks for the comments guys. Its going to be fun to push the potential of this engine and platform. Im still getting 30+ MPG with multiple pulls a day and my intake air temps have been amazing, dyno never saw over 115 degrees in a 90 degree room. I just built a quicky intake with a mushroom filter and still need to bust out a catch can even though it doesn't smoke.

Due to the radical nature of the intake manifold my throttle enrichening needs a little work, other than that its a real blast to drive!


...and you're in Austin! Right down the road...nice!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top