Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Truth about the SR20VET Exhaust camshaft.

+ Reply To Thread
Posts: 11-20 of 70
2014-10-07 17:09:39
#11
Originally Posted by ca18
wouldn't the centerline make them unusable?


Unusable? no? Would make them perfectly usable for turbo, pop them in at 0-0. Unlike 20v's which ideally need dialing in
2014-10-07 18:09:18
#12
I'd like to see someone with a larger turbo setup use the high lobes. I'll try it out myself when I get it together, but I have a feeling that my t28 setup I'm putting together won't be free flowing enough to benefit from these lobes
2014-10-07 18:15:03
#13
So the high lobes are there but aren't used in a stock vet?
2014-10-07 18:39:19
#14
so will my vvl active on both cams if I put them in my VE?
2014-10-07 19:08:41
#15
Re: The Truth about the SR20VET Exhaust camshaft.
Originally Posted by TheSam
So the high lobes are there but aren't used in a stock vet?

Yes
2014-10-07 19:09:21
#16
Re: The Truth about the SR20VET Exhaust camshaft.
Originally Posted by P10
I'd like to see someone with a larger turbo setup use the high lobes. I'll try it out myself when I get it together, but I have a feeling that my t28 setup I'm putting together won't be free flowing enough to benefit from these lobes

I'll be using vet ex and 20v in with my twin scroll holset turbo setup
2014-10-07 19:10:13
#17
Re: The Truth about the SR20VET Exhaust camshaft.
Originally Posted by TREYDEE
so will my vvl active on both cams if I put them in my VE?

Yes, it was only the rockers in the vet that disabled the exhaust vvl
2014-10-07 21:04:35
#18
Originally Posted by P10
I'd like to see someone with a larger turbo setup use the high lobes. I'll try it out myself when I get it together, but I have a feeling that my t28 setup I'm putting together won't be free flowing enough to benefit from these lobes


Someone already did. Coohed did with his turbo build with dyno results too.
2014-10-07 21:18:42
#19
Originally Posted by BlueRB240

Someone already did. Coohed did with his turbo build with dyno results too.




...and it rocked before the pump dumped!


Last edited by 1fastser on 2014-10-07 at 21-25-51.
2014-10-07 22:34:11
#20
Originally Posted by Coheed
Found it! My 1.06 vs .78ar housing dyno comparison sheet. Granted, this is on the VET cams!



This was hid 30R if I remember right.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top