Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ve-t spun bearing

+ Reply To Thread
Posts: 131-137 of 137
2013-12-08 18:31:58
#131
could your ecu be fucked?

buddy of mines car would do similar stuff, stock se-r.. something similar happend to the injectors an it would run fine cold but once warm would drop a cylinder or 2..

either way, i'd do a comp test anyways, i'd of done that after the first start.
2013-12-09 06:11:13
#132
Okay got everything situated!!! Its drives good just have to get a more steady idle but I need yo get rid of a boost leak. Did a smoke test and I had a couple around the bov. Everything is going great. However its still slightly smoking from the vc I removed the pcv valve and hose. Hopefully the oil rings need to be broken in
2013-12-10 18:13:04
#133
Okay so im getting bad tranny leak but its leaking in top of the tranny, from the looks of it looks as if it would be coming from the breather valve. Idk if thats possible
2013-12-10 20:01:19
#134
Over fill the trans? Are you sure its gear oil?
2013-12-10 22:22:00
#135
Fluid should be 1" blow the speedo gear hole. You might have over filled it.
2013-12-11 03:42:21
#136
Go for the rods and squirters
2013-12-11 03:53:21
#137
the rods are currently pending but its been a few days, so cash still talks. squirters are also ready for shipping, just saying.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top