Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: avenir sr20det b13 swap help

+ Reply To Thread
Posts: 1-8 of 8
2013-02-26 04:34:35
#1
avenir sr20det b13 swap help
Im doing a avenir sr20det swap on my b13. I just wanted to know which distributor do i use.
2013-02-26 05:30:53
#2
Use your stock dizzy.
2013-02-26 05:48:40
#3
your going to want a 1.21 jiggawatt flux capacitor.
2013-02-26 06:47:57
#4
Were do i get the flux capacitor at? Lol.
2013-02-26 06:54:53
#5
you'll have to ask Doc Brown about that one..
2013-02-27 03:24:43
#6
This is my first swap. So do i use the avenir wiring harness or my stock 1. A link would b nice.
2013-02-27 06:45:25
#7
dude, not tryin to be a dick, so PLEASE!!! do not take it as that..

but you seriously need to do some research, one thing you'll find out on this forum is we do not like spoon feeding people that have obviously not done so, and dont say you did because thats horse shit lol all the info you need is already on here, if you cant find it using the forum search, try googling your question then add sr20 to the mix.

to answer your question, i'd use the stock harness just to be on the safe side.
2013-03-04 07:14:06
#8
Kromezilla like lynch said it's all on the forum! Only cause your from my hometown I'll throw you a bone... use your stock everything [harness, distributor]assuming your b13 is a Se-R. If it's a 1.6 you need Se-R engine harness and distributor. No more questions without researching please, good luck man!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top