Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Best turbo to use on a standard SR20VE engine.

+ Reply To Thread
Posts: 11-20 of 83
2012-08-18 14:19:31
Please get a proper T3 backhalf for a VE engine. It loves to breathe!!
2012-08-18 14:19:35
Why so set on a GT series turbo. For half the cost you could get a Precision unit and it will spool up almost as fast as a GT series.

Depends on what power levels your wanting but there are plenty to chose from thats for sure.

Either way, i say t3 to let the motor breathe man.
2012-08-18 14:20:05
Ever thought about holsets??
2012-08-18 16:00:36
Thanks can you add to the poll too.
2012-08-18 21:19:50
hx serie holsets are pretty good and best part is that they are affordable. great turbos
2012-08-18 21:27:43
ebay turbo
2012-08-19 02:14:00
I agree with Ashton, the precision units are awesome. Get a billet wheel with a BB center and the response is very comparable. Reliability is hard to beat on the GT turbos. They are awesome. But precision units are cheaper slightly and make a ton of power!

Bigger is better on the VE. I've never been so content with my VVL setup until stepping up to a 6262. It compliments the engine perfectly. But for a std VE I would go with a 5757 or similar size.
2012-08-19 20:59:04
Thanks so far guys. More votes please, looks like I am stearing towards the T3 turbo option.
2012-08-19 21:00:50
Seriously screw the pole and look at REAL data............This is not American Idol

You should be looking at a T3 option MINIMUM, or there WILL be tears.

Just saying
Last edited by Boostlee on 2012-08-19 at 21-01-07.
2012-08-20 00:50:09
comes down to how much power u want to make
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top