Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo Noob

+ Reply To Thread
Posts: 21-30 of 41
2012-08-17 21:24:29
#21
370 inj n60-62 maf walbro 255 nismo fpr, fpr gauge, oil restrictor, jwt ecu, 3inch Dp, gauges and you'll be set
2012-08-17 21:28:01
#22
You should be able to figure that out with the following links.

http://www.sr20-forum.com/information-library/167-maf-size-part-s-whp-output.html

http://www.sr20-forum.com/information-library/166-inj-size-whp-output.html

370's @ 3bar on an SR DET will be maxxed out quite quickly. Since you have to get your JWT tuned anyway, you might as well decide what hp level you'd like to achieve using those links. Acquire the parts that will get you there.
2012-08-17 21:50:53
#23
The subaru injectors would be a good choice. They are like 520cc and fairly cheap. You should check around for a calum basic ecu, it would be pretty much the same as a JWT ecu except the calum is cheaper. And the P11/B15 trans would be a good idea if you break your stock trans, but I beat the living snot out of my b13 trans for 2-3 years and never broke anything except 5th gear.
2012-08-19 00:37:18
#24
The kit comes with 3inch dp,injectors,turbo and manifold,j pipe,intercooler+piping, blow off valve
Im missing n60-62 maf walbro 255 nismo fpr, fpr gauge, oil restrictor, jwt ecu or another ecu, gauges
2012-08-19 00:37:54
#25
Is there anybody in cali that can help me with the oil tap for boost ?
2012-08-20 04:20:34
#26
???
2012-08-20 05:17:33
#27
theres a thread on here that shows you how to tap your block,
also a price list,
2012-08-20 13:47:40
#28
Originally Posted by B13TONY
Is there anybody in cali that can help me with the oil tap for boost ?


Where in Cali are you? Do you have the drill bit and tap?
2012-08-20 19:30:37
#29
Im in san diego sadly No and do you know what are the sized for drill and tap or where can I find the link ?
2012-08-20 19:54:01
#30
http://www.sr20-forum.com/tools-fabrication/51252-blairellis-drill-bit-tap-tool-rental-oil-drain.html

http://www.sr20-forum.com/forced-induction-turbo/48076-how-drill-tap-your-block-turbo-oil-drainage.html
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top