Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: thinking of boosting P10

+ Reply To Thread
Posts: 1-10 of 14
2012-04-28 17:18:59
#1
thinking of boosting P10
So in my quest to get my P10 to be able to move just a little more than stock I want to do a simple turbo setup. Of all the Nissan turbo motors what motor uses a sidemount intercooler setup. What issues if any at stock boost(7lbs) I would have any issues....
Last edited by NissanGuy on 2012-04-28 at 17-22-52.
2012-04-28 18:45:54
#2
lots of vehicles use smic's, but really.. go for a fmic. it can be done an still look sleeper.



You seriously dont know how many times I've been asked, Wheres your intercooler? lol
2012-04-28 18:53:28
#3
Go with a front mount and yes boost it bc they are heavy bitches.
2012-04-28 19:30:40
#4
Buy my kit. Piping was made for the g20 and the intercooler brackets too. All you will need is a small downpipe section and ecu. Ill drop in the 370s, oil and feed lines.

The g20 will bay will not like a smic setup, heatsoak is a bitch and the car will ping. Unless you plan on chopping the hood up a smic wont work with the florida heat.
2012-04-28 20:07:15
#5
stock boost?lol 6.5psi max...w/g cracks at 2-3psi? i wouldnt even run a ic set up. just do a cheap as blue bird tmic set up if you really want a ic set up for short term reasons
2012-04-28 22:48:56
#6
i have a complete BB TMIC with couplers and t bolts, BB manifold, J pipe and o2 housing, new manifold gasket and t2 flange gasket for sale all you need is a T25... $220 LMK im in SoUth Florida
Last edited by 91SE-R on 2012-04-28 at 23-13-48.
2012-04-29 00:29:10
#7
P10FTW I'm not ready to start buying things yet but how much for the kit?
2012-04-29 01:05:29
#8
Dude^ not to knock p10ftw sale, but ur better off making a deal with that BB kit. Its exactly what u need but the p10 ic kit is good too, idk its totaly up to u. But. U heard my advice. No ic needed
2012-04-29 01:31:37
#9
boost it and dont look back. spend extra money on good quality parts and dont cheap out or you will end up owning 3 busted engines like me.
2012-04-29 01:59:47
#10
W/E you do, you will need a decent IC. 95-100+ degrees in a cramped G20 bay is not good.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top