Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo Advice: Precision 6262

+ Reply To Thread
Posts: 1-10 of 18
2011-12-30 18:04:08
#1
Turbo Advice: Precision 6262
So I have a T3 Garrett Turbo that is .60 on the intake side and .48 on the exhaust side, it's mounted to my car with a Protech log manifold.

I bought an old Protech EQL manifold a couple of months ago and someone local is selling me a journal bearing Precision 6262 that is .70 on the intake side and .63 on the exhaust side.

I love how quick my current setup spools but I don't mind sacrificing that.

Anybody have experience with a similar setup as the one with the 6262. If so how did you like it? and how was the spool?
2011-12-30 18:46:51
#2
I have no experience with turbo but I hear nothing but good things about 6262. Theres a thread by a member with that turbo and it made great power.
2011-12-30 18:48:59
#3
What engine and cams are you running?
2011-12-30 19:44:48
#4
I've got a DE with 8.5 comp, and I don't have cams right now. But I'm thinking of getting some BC stage 2
2011-12-30 19:53:28
#5
its gonna pull like a beast with not much loss of spool, ask user Coheed
2011-12-30 19:57:20
#6
^ I agree 100%
2011-12-30 20:33:51
#7
La mejor turbina q puedes montar suerte!!!!!
2011-12-30 20:42:47
#8
If it's the 5 bolt exhaust housing then it will also fit the manifold right. The older pro-tech manifolds were made with the 5 bolt housings and the newer ones fit both.
2011-12-30 23:25:54
#9
Originally Posted by Payu
La mejor turbina q puedes montar suerte!!!!!


Gracias Payu, te voy a estar dando una llamada en unos meses a ver si le puedes dar un retune pero en un dyno esta vez. Claro está, si todavia estas bregando las ecu
2011-12-30 23:32:56
#10
Contacted the guy just now, the guy sold it already. Sucks cause I was gonna tell him that I could pick it up tonight or tomorrow morning. You guys recommend any particular retailer?
Last edited by pr20de on 2011-12-31 at 00-30-46.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top