Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Lynch's 6spd / VE-T thread

+ Reply To Thread
Posts: 1,191-1,200 of 1,893
2012-09-12 15:55:31
#1191
Remember dude I have a set of DET rods and pistons collecting dust. Their yours if you want them.
2012-09-12 16:11:39
#1192
lynch, I can get you an eagle rod sr20VE CP piston combo for around $800 shipped, thats unless his costs went up.

Hit up this seller, He might even be able to do better than 800 shipped. Just tell him you need the VE pistons 9:1 compression and tell him Ashton (roche0823@hotmail.com) sent you to him.
CP Pistons Eagle Rods Combo for Nissan SR20 Silvia | eBay
2012-09-12 17:58:53
#1193
Det pistons and rods and you have a similar setup to gio's that is pushing 400hp+
2012-09-12 18:56:04
#1194
Originally Posted by xavi1320t
I know they're much bigger, I have brand new vet pistons that I bought from greg. Pistons and rods are at least 650+ he can spend less than 400 bucks and have a bottom end that with water meth can push over 550 whp. I think cost over weight the fully built option. I love oem shit anyways so thats just me. I doing an oem build with the exception of the bearings, but other than that im going to use all oem parts to turbo the ve.



I prefer to peace of mind of overbuilding..........Especially when a complete set of forged internals are only $100+ more than the stock stuff

Reliability > nut swinging contest for stock stuff ...........Unless you have the deep pockets , tuning knowledge and wanna pave the way
2012-09-12 19:14:53
#1195
i under build cause i like to blow stuff up!
2012-09-12 20:43:30
#1196
Originally Posted by lynchfourtwenty
tell ya what, buy a ve, have it sent to me, i'll take what i need, send the rest to you with some cash on top.


I think we'll be able to work something out
2012-09-12 22:53:52
#1197
This is an extremely budgeted build, hence the VET pistons, they are less then half the price of CP pistons. As for rods, i was thinkin of just using some det ones or even the stock ones, remember im not looking for crazy power, an most of the time will be on fairly low boost.. but next time i see that GTR i want to be able to flick a switch that with change my maps which will up my boost and maybe, just maybe be able to stay with him a little longer

I just want to stop worrying about melting my engine, everytime im on boost it runs through my head DONT MELT DONT MELT! My next build, which will be in the distant future (if this one works out) and i will take my time an do a CP piston / pauter rod combo with all the rest of the goodies.

but for now i want something im not so scared to turn the boost up lol.


I'm also planning on taking advantage of the nemu's boost by gear when its available, that should help take it easy on the trans, which is something else that will be upgraded with the fully built engine.
Last edited by lynchfourtwenty on 2012-09-12 at 22-54-51.
2012-09-13 02:49:33
#1198
Originally Posted by lynchfourtwenty

I just want to stop worrying about melting my engine, everytime im on boost it runs through my head DONT MELT DONT MELT! My next build, which will be in the distant future (if this one works out) and i will take my time an do a CP piston / pauter rod combo with all the rest of the goodies.


Get NEMU, get it pro tuned, period.

Stock VE can take a lot, look at Jamie's post in this thread: http://www.sr20-forum.com/turbo/61720-ve-t-people-what-pistons.html
2012-09-13 03:14:35
#1199
Originally Posted by Vadim
Originally Posted by lynchfourtwenty

I just want to stop worrying about melting my engine, everytime im on boost it runs through my head DONT MELT DONT MELT! My next build, which will be in the distant future (if this one works out) and i will take my time an do a CP piston / pauter rod combo with all the rest of the goodies.


Get NEMU, get it pro tuned, period.

Stock VE can take a lot, look at Jamie's post in this thread: http://www.sr20-forum.com/turbo/61720-ve-t-people-what-pistons.html
I agree with Vadim %1000. Outsource a tuner if need be, that is where you should spend the money.
2012-09-13 03:27:44
#1200
Originally Posted by P10FTW
Originally Posted by Vadim
Originally Posted by lynchfourtwenty

I just want to stop worrying about melting my engine, everytime im on boost it runs through my head DONT MELT DONT MELT! My next build, which will be in the distant future (if this one works out) and i will take my time an do a CP piston / pauter rod combo with all the rest of the goodies.


Get NEMU, get it pro tuned, period.

Stock VE can take a lot, look at Jamie's post in this thread: http://www.sr20-forum.com/turbo/61720-ve-t-people-what-pistons.html
I agree with Vadim %1000. Outsource a tuner if need be, that is where you should spend the money.


I think he has to put it on the dyno and tune and then run in the first place.

We are building an engine out of fiction from one that hasn't even been tested in the lab or on the track.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top