Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Lynch's 6spd / VE-T thread

+ Reply To Thread
Posts: 981-990 of 1,893
2012-06-11 19:43:31
#981
no, not those.. the vacuum ones.. i think they are for the charcoal canister or maybe egr.
2012-06-14 23:30:22
#982
I just went and did 2 back to back runs, had a new fuel map to try, so figured while i was doing it i would play with the timing map a bit too. so i took the first map and just changed the timing map a little and saved it under a different name.

Red line is the first run which is the lower timing one, Blue line just had some fueling changes, Green run is my previous run before today.



i think i took to much timing out of the middle, but up top seems about right.
2012-06-14 23:43:13
#983
that was on 12psi?
2012-06-14 23:53:54
#984
yep, all 3 runs were on 12-13psi
2012-06-15 00:36:38
#985
I dont know if that first run was a fluke or something, but so far with this program the numbers have been pretty consistant. I think if I add back a little timing it'll get rid of that dip. Not to mention it holds out power pretty well, I might have to invest in some s&r's, But I think if it comes to that I'll do it when I build the bottom end and maybe even run some different cams. I haven't really decided how far i want to push it, I want to build a 400whp car, but only really run 250-300 to save on transmissions an such lol
2012-06-15 01:36:27
#986
Nice, keep going. You're getting there.
Hmm remind me, you have a gtir t28 turbo right?
2012-06-15 01:38:38
#987
PTE-5128 aka GT2871R but with slightly different wheels and a 35r style comp housing. .86 on the hot side.
2012-06-15 01:41:44
#988
Ahh, What's the compressor map like? You may be able to make 400 whp on it
2012-06-15 01:42:25
#989
Mmm i am almost erect seeing GT2871R, I think that's the best t28 flanged turbo to use
2012-06-15 01:46:25
#990
not sure tbh man.. I think its good for 425 but is suppose to have some better characteristics over the normal 2871, they come in several flavors though, some will do 475, some 450, some 425. I'm really only lookin for about 300whp and I think I can do that on this engine, but I dont expect it to last along time lol.

One thing I know is the intake and exhaust wheels are 51mm even, most of the 2871's have mixmatched wheels, not really sure on the effects of all this lol.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top