Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Lynch's 6spd / VE-T thread

+ Reply To Thread
Posts: 841-850 of 1,893
2012-04-27 18:23:10
#841
Lynch can you post some more pictures of your PCV setup?
2012-04-27 18:49:17
#842
brother lynch what injectors are you using?
2012-04-27 19:02:13
#843
STI
2012-04-27 19:03:32
#844
I didn't use spray paint on any of those parts. They all were coated with an ultra high temp powder coat. I used that stuff on all the manifolds I had and it burns (with glowing manifold) to an ashy dark grey but always stayed on.... I'm betting somebody "touched it up" with some VHT.

As for hot side pipe... This is what I use: Wrap
2012-04-27 19:09:54
#845
Originally Posted by SentraThis96
Can we have a pic of some of the great Keo's Gauge setup? For inspiration purposes of course






not my work, but I did sell it and going to do it a little different.
2012-04-27 19:10:47
#846
Originally Posted by wnwright
I didn't use spray paint on any of those parts. They all were coated with an ultra high temp powder coat. I used that stuff on all the manifolds I had and it burns (with glowing manifold) to an ashy dark grey but always stayed on.... I'm betting somebody "touched it up" with some VHT.

As for hot side pipe... This is what I use: Wrap


I could've sworn Vadim did it. I mean i owned it like 5 times. and it didn't look that way until I got it back from Vadim.
2012-04-27 19:14:39
#847
Always blaming the Russians when you are in a hurry.
2012-04-27 22:14:53
#848
Heat shield installed!







Looks better then just the manifold now that its all discolored. The main reason I didn't put it on to begin with is so I could re tighten the manifold to head nuts after a few heat cycles, which I've done so its all good now.


Originally Posted by SentraThis96
Lynch can you post some more pictures of your PCV setup?


That blue hose goes from the valve cover to a black hose thats stuffed inside then goes to the same piece of pipe the bov recircs to. just on the back side.. My friend drilled a hole an threaded in a -4 an barbed fitting, surprisingly it was air tight!

Originally Posted by Ulysses
brother lynch what injectors are you using?


Originally Posted by Keo
STI


Originally Posted by wnwright
As for hot side pipe... This is what I use: Wrap


thanks for the link
Last edited by lynchfourtwenty on 2012-04-27 at 22-18-31.
2012-04-27 22:51:24
#849
How are you running an external wastegate with a GTi-R manifold? Are you using one of those adapters that goes from the turbo inlet flange to the turbo?
2012-04-27 22:55:49
#850
Here's a pic from page 32:



wnwright made this manifold. I think him and I are the only 2 people who've actually used it this way.

Heres a pic from page 1:



the only thing i did was complete the downpipe using a part of an old down pipe keo had, but i bought new flanges, flex tube and o2 bung for my wide band.. there's pics of the completed down pipe on here, if your curious on how it looked you'll have to go back some pages an look for it
Last edited by lynchfourtwenty on 2012-04-27 at 22-59-25.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top