Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: P11 disassembly woe(s)

+ Reply To Thread
Posts: 1-10 of 20
2011-05-16 00:57:35
#1
P11 disassembly woe(s)
Ive got it halfway apart and i cant get the middle shift rod out...

The first one slid right out.

Ideas?
2011-05-16 02:01:29
#2
Which is correct?



2011-05-16 02:44:07
#3
long part down
2011-05-16 04:32:50
#4
Thanks. Im kinda stuck now with the race and bearing that i have to pull
. The puller that is listed in alldata is almost $800
2011-05-16 12:30:15
#5
middle shift rod? It will come out once you have pulled all the check balls out and taken the shift forks off.

Got any pics of what you're talking about?
2011-05-16 14:05:04
#6
Im past that now.

Im stuck at pulling the race and bearing to put in the new bellhousing. the Tool called for in the FSM is $800.
Ideas?
2011-05-17 10:24:58
#7
bearing for what? the diff?
2011-05-17 12:40:11
#8
The bearing for the mainshaft (plastic oil channel under it)
and the race for the diff
2011-05-18 12:30:37
#9
The race for the diff will come out by tapping it from the other side of the oil seal iirc. The mainshaft bearing should be on the shaft. I think a snap ring holds it on. You have pics?
2011-05-18 13:06:37
#10
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top