Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: First det swap startup!!!HELP!

+ Reply To Thread
Posts: 1-7 of 7
2011-04-11 22:18:07
#1
First det swap startup!!!HELP!
Video04112011175946.mp4 video by keithjr84 - PhotobucketThis is the video of my engines first startup like the title says. It sounds rough.mind you i have no full exhaust yet. sounds like its tapping but i cant figure out where to go from here
setup=
BB sr20det JDM
370's
det maf
calum basic
2.5 intercooler piping.

I still need to complete the intercooler setup with a bov. Will the bov not being there and the o2 jpipe sensor not plugged in be affecting this?

Any help will be greatly appreciated
2011-04-11 22:38:22
#2
sounds like an awfully deep knock there, although it's hard to hear it.

bov will not affect it until you are under boost. You should be able to put the maf on before the TB and run it n/a if you wanted. The o2 missing will make it run rich but personally I've never done it so I'm not sure if it would make it run that rough or not, but my guess is no.

You sure your plug wires are right?
2011-04-11 22:40:58
#3
No im not anyone have a picture of how there b14 dizzy is setup?
2011-04-11 22:41:39
#4
also that put put put is coming from an open downpipe
2011-04-12 14:57:36
#5


open downpipe running on calum as well. The cylinder order is starting from passenger side 1,2,3,4. The dizzy cap should be labeled with #'s. 1,3,4,2 is the firing order.
2011-04-12 15:07:03
#6
put an exhaust on it otherwise we can really hear the issue... I don't hear anything bad.
2011-04-12 15:13:04
#7
its not labeled. can someone please post a pic of actual lineup of the plugs from dizzy to plug. thank you
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top