Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Dyno sheets post them up! -Turbo-

+ Reply To Thread
Posts: 61-70 of 201
2009-04-22 22:44:00
And of course I'll be on my way home

I should have mentioned it has to come from the red car
2009-04-22 23:08:15
haha who cares what car it comes from I just want to see it in action. I never got to ride in any of j's cars not even the ve
2009-05-19 01:42:46
I went to the dyno.
I drove to "the shop" in ct and baselined at 240hp and 200tq. After tuning my safc neo, jimmy was able to pull 264 and 247tq.

^^^^this is my before and after^^^

^^^final numbers^^^

^^^^power number with afr^^^^^

Im happy!!!
2009-05-30 08:35:56
Today's run:

GT28R @ 1.2 bar (17 psi)
S15 480cc @ 4 bar
3" exhaust
S4 cams

276 whp & 280 Tq

Fuel pressure was at 3.7 bar so its a very rich 4 bar setup.
2009-10-22 13:59:02
no one has posted in a while so i wanna wake this post up.. here is the vid--->http://videos.streetfire.net/video/SDRMIAMIs-800hp-SR20DET_714828.htm

Went to the dyno yesterday and pulled some new numbers 796hp and 578tq @ 7600rpm with 30 psi on e85. We are sure that we could get allot more but had a few issues we were dealing with like spinning on the dyno and boost controller shutting me down at 30 psi .. The car is still a full street car with a/c and p/s and is drivin every day...

Vidz will be up soon and will link them once they are ..

Last edited by BenFenner on 2012-05-25 at 15-47-52. Reason: Replace dead dyno image link.
2009-10-23 01:37:39
2009-10-23 02:15:47
GOD DAMNNNNN things putting down numbers
2009-10-23 02:27:52
absolutely sick car, sooooo clean, and ultimate description of a true street monster. haha, Keep up the good work.
2009-10-23 04:06:11
Originally Posted by Daniel
Today's run:

GT28R @ 1.2 bar (17 psi)
S15 480cc @ 4 bar
3" exhaust
S4 cams

276 whp & 280 Tq

Fuel pressure was at 3.7 bar so its a very rich 4 bar setup.

Your tune must be absoultey terrible. I made 290/312tq. on a stock det with gt28r @ 20lbs on 2.5" exhaust. Do a compression check or something haha
2009-10-23 19:06:22
Originally Posted by TeKKiE

here you go..

SR20DET Redtop
Weisco Pistons 88.5mm 9.0:1
Benson Automotive Custom Sleeved and O-Ringed Block
Crower Billet Rods
Calico Coated ACL Race Bearings
ARP Main Studs
ARP Head Bolts
SDR Fulley Blueprinted/Balanced bottom End With Polished Crankshaft
ATI Crank Pulley
Moroso Oil Pan
Stock Engine Mounts
Greddy Style Pulleys

Full Race Head Ported & Polished with Coated Comperssion Chaimbers, done by Dan @ DPR Racing
Full Radius Valve Job
Apexi 1.8mm Head Gasket
Jun Style Intake Manifold with 80mm billett TB
Greddy Cam gears
Tomei Solid Lifters
JUN Valve Springs
JUN Titanium Retainers
Jun Valve guides
Greddy Rocker arm stopper
Moroso Catch Can With -12 Lines
BC in/ex 272deg Cams

Precision 6765 t/3 billett turbo
Peak Boost Top Mount Turbo Manifold
SDR Custom Intercooler pipes
24x12x4 FMIC
Greddy Type-R BOV
Apexi N1 3inch full Exhaust
Turbo Smart 38mm Wastegate
SDR custom SS downpipe

Z32 TT 5speed with Mazworx adapt kit
Single Pice Steel Drive Shaft
Exedy Twin Disk Clutch
SDR Custom Rear End

Tanabe Sustec Pro-Sevens
Tanabe Teas Controller
Tien Tie Rods
Tien tension rods
SPATS Front And Rear Strut Bars

Work VS-XX
18x9 Front Wrapped with Perreli 245/45/18
18x10.5 Rear Wrapped with Perreli 285/35/18

Custom Brembo 14.1" Brake Upgrade
300zx TT rear Crossdrill and Slotted Rotors
Kevlar Brake Lines

Fuel System:
1600cc Injectors
Aeromotive full race Fuel Pressure Regulator
Weldon 2025 race Fuel pump.
RCI 12 gal fuel cell
Sard fuel rail
-10 fuel feed line from tank to rail

Microtech LT10-s Stand Alone
With X4 Ignitor Box
Custom Wire Harness
MSD Baster Coils x4
Taylor 8mm Spark Plug Wires

KOYO Radiator
Flex A Light dual Fans
Radiator Hoses
SDR Custom Oil Cooler/Oil Filter Relocation Kit
Spac pressure release cap

Custom Wrapped Seats
AEM Wide Band
AEM Boost Controller
10pt Roll Cage Built By Chassis Engineering
PYLE Double Din Radio/TV
JDM Digital A/C Controls
Carbon Fiber Glove Box
MOMO Steering Wheel
Greddy Turbo Timer
Optima Yellow Top With Trunk Relocation Kit
Apexi EL Oil Temp Gauge
Apexi EL Oil Press Gauge
Apexi El Water Temp Gauge

JDM S13 Silvia Front End Swap
Piggy Front Lip
JDM OEM Side Skirts
JDM Rear Valance
JDM OEM Power Fold Mirrors
Carbon Fiber Door Pillers
Carbon Fiber Gas LID
Orgin Style Tail

Misc Modds
SDR Wire Tuck
Shaved Body Line
Blended Door Handles
SDR Brake Line Tuck
Pulled And Rolled Rear Fenders
Full A/C
Full P/S
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top