Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Moving radiator forward on NX

+ Reply To Thread
Posts: 21-30 of 38
2010-09-13 19:25:31
#21
from my measurements of the space im going to use...
the max i can use is 13" height x 24" width
2010-09-13 19:28:14
#22
it fits under my rad support in my n13...hehe
hmm ill keep my eyes out for one of those dimensions!
2010-09-13 19:36:24
#23
THanks
2010-09-13 21:35:31
#24
thinks mishimoto makes it...
2010-09-13 21:36:09
#25
it should fit under you radiator support just have to use custom mounts....
2010-09-13 21:38:30
#26
I feel the half rad is to small maybe on a drag car itll work. Road coarse or street car id say its to small.

Stratton.
2010-09-13 21:39:43
#27
mishimoto universal radiators
2010-09-13 21:41:21
#28
they are used all the time and work...and its not a stock radiator so it should cool better....
it is what i will be running....jmtc.....just tryin to give ideas
2010-09-13 21:44:40
#29
not as pretty and shiney but....
2010-09-13 21:49:30
#30
Originally Posted by STRATTON
I feel the half rad is to small maybe on a drag car itll work. Road coarse or street car id say its to small.

Stratton.


i see where your coming from and i agree it might be too small. depending on your turbo setup you might see too much heat soak, i went from a koyo r radiator down to a stock radiator on my setup ( i was having my koyo r radiator repaired from a slight from end collision) and on my particualr setup the stock radiator wasnt sufficent enough to cool down my engine and i was seeing too much heatsoak. then i got my radiator back from being repaired swaped it out and all was good. so its hard to determine weather or not a smaller thinner core single core would be efficent enough for cooling purposes on a non drag car.

its possible it would work though
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top