Thread: Will this work? N14 Intercooler piping kit on an NX2K

INTERCOOLER ALUMINUM PIPING KIT NISSAN N14 PULSAR GTiR: eBay Motors (item 230485677801 end time Jun-19-10 08:42:51 PDT)

LMK soonest, thanks.

im using it in my b13. and soon my b14 too.

The minor trouble I think you may run into is with the section right before the TB if the NX has a highport. But I'm sure you already know that.

Yeah, the biggest concern is overall general fitment. If it has to be tweaked a bit, that's fine.

I've seen these a few times. Tweaking a bit thats it.

for the tb you use a 45 degree 2.75 to 2.5 coupler

Thanks bud I appreciate it!

i got one in my B13 and just a few tweaks here and there and thats it, overall nearly a plug and play

Cool, I called the guy today and he's about an hour's drive away, so we're going to go pick it up tonight.

Should be able to put the car together tomorrow (Jen may have to do it without me)

Are you using T25 or T28?

I'm using that same product in my B13, I had to do some adjustments like welding a flange and the pipe that goes into the TB

I also had to cut the flange since I have a T25 even the 3 bolts fit there are a difference in the angle, that pipe will bolt straight in a T28