Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: turbo set ups (post pics )

+ Reply To Thread
Posts: 481-490 of 532
2013-10-14 12:22:26
#481
Here's mine

2013-10-14 12:37:02
#482
Here's mine

2013-10-15 19:08:11
#483
My Pulsar GTI-R setup
Holset HX35 Super
Denso 1000cc injectors
Z32 Maf
full boost on 3,8k rpm 1,8bar approximate power is 450 bhp


2013-10-16 01:42:47
#484
303.8bhp/228.6lb.ft

Td05h-16g turbo on EUDM 10:1 motor





For winter the filter migrates up:

Last edited by groundscraper on 2013-10-23 at 18-34-15.
2014-02-14 01:42:59
#485
2014-02-14 20:46:59
#486
Here is my stock setup ( engine bay's a little dirty )


Last edited by TINOG20 on 2014-02-14 at 20-48-06.
2014-02-16 03:23:59
#487
I Just went back to page 10 post #396 to see I only posted my build video and not any setup pics, so here you are :-) Got me an sr16ve valve cover going on in the spring so this pic will soon be outdated. These pics are from 5+ years ago. I'm slow ;-D

Stock minus the rusty cracked pacesetter header


Done building ready to swap (built in my kitchen area)


Swapped money shot


EDIT: I just realized how old the swap picture actually is. It still basically looks the same under the hood with a few differences (flame shield) including the WG is no longer plumbed to the PCV, the VC breather is gone and hoses properly routed for draw thru, the air cleaner has been replaced, theres a rag stuffed in there for some reason which is gone (lol!), the OEM fuel filter is a z32 style, I later acquired and installed a manifold heat shield, and a few other minor hardly noticeable functional differences.
Last edited by 93specv on 2014-02-16 at 22-52-42.
2014-02-16 04:34:54
#488
Before catch can and lightweight battery setup


With small battery


Catch can setup
2014-02-16 07:17:04
#489
Originally Posted by TINOG20
Here is my stock setup ( engine bay's a little dirty )




Wow, havent seen a U12 top mount for a long time!
2014-02-16 17:08:50
#490
Originally Posted by Evlnxr
Originally Posted by TINOG20
Here is my stock setup ( engine bay's a little dirty )




Wow, havent seen a U12 top mount for a long time!



Lol, thanks, yeah when I bought the car it had the BB U12 engine, but 4th cyl valve was damaged so I swapped engines to the W10, so I currently have a W10 engine with a BB top mount setup, I don't have a hood scoop as that becomes too obvious that I have something extra so it's currently a nice sleeper, I do get a bit of heat soak, but overall for a stock engine this thing is quick with the shorter distance in the intercooler piping I still haven't had a chance to see how the JWT ECU is setup they mentioned all stock mapping, but I feel it boost over stock 7psi and others who have rode in may car have said the same
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top