Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How high shoud I rev?

+ Reply To Thread
Posts: 11-16 of 16
2010-06-04 18:34:52
#11
I have springs and retainers. with SR16 cams. So 9K shouldn't be a problem.
2010-06-04 21:32:20
#12
Its all about crankshaft harmonics that determines how high you could technically rev. Id say throw it on the dyno and figure of where you make peak tq and peak hp. Then make the rev limit so when you shift your rpm falls right back to where you make peak tq so there is no loss in power between shifts so you stay in your power band.
2010-06-04 21:57:07
#13
9K all day. Then again, I would also put it on a dyno and figure out where the power stays after peak hp/tq.
2010-06-04 22:40:18
#14
I will be setting mine up with a 9k rev limit.
2010-06-04 22:42:02
#15
Originally Posted by SUNNYboi
I wonder why it can rev that high......lol

On stock S&R i wouldnt rev a VE passed 8.5K


I've been following his build/car for a Loooooong time. His build can take 9500rpm no problem.

I agree though that it should be put on a dyno. Then a shift light/aftermarket tach is in order. I know when I take mine to 8500, the tach reads beyond 9000rpm.
2010-06-04 23:39:18
#16
Wow, your tach is way off. Mine shows 8500rpm at the limiter of 8300. Only 200-300rpm off at the most.

The MSS has a shift light built in

I think the motor feels great at high rpm. Very smooth. The motors sound is aural pleasure.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top