Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: b14 se-r harness on DET

+ Reply To Thread
Posts: 1-5 of 5
2010-05-16 14:15:28
#1
b14 se-r harness on DET
I just got my 96 se-r harness and some of the plugs on the harness are not going to work with my sensors on my engine....does anyone have a write up on what plugs i need to change? I have my b13 harness i used at my disposal.

My det is out of my 92 that was totaled by a stupid drunk and now i am in a wiring nightmare lol

Thanks
2010-05-16 14:22:00
#2
Just plug up what plugs up and it will work.

Put in B14 head temp sensor and guage temp senor on the DET and you are done
2010-05-16 14:31:38
#3
ok awesome. does the dizzy and coil plugs fit also?
2010-05-16 14:39:54
#4
Originally Posted by buffaloBill
ok awesome. does the dizzy and coil plugs fit also?



it will if you use a B14 dist
2010-09-17 04:01:36
#5
hey buffalo your pm box is full so i figured id continue our conversation here. lol. And i guess if anybody else has had these problems chime in please.

hahah dammit. I ended up just putting the b13 line on it. the only difference is it doesnt have a place for a connector to the harness but oh well. I just noticed tonight when i was putting my shift linkage together that there is no room for the shifter to move because it is touching the stablizer bar. Did you have this problem? And i tried turning it over tonight just to see if it would and i got nothing. everything else works such as all my electronics and stuff. I feel like its the clutch pedal button but i had the clutch floored when i tried to start it. Also i have an extra connector from the ser harness going into the underdash but there is nowhere for it to go. my ga harness has 3 underdash and the ser harness has 4. What do you think is going on? And thanks for all your help. oh and i did end up getting that drive shaft in it was at a wierd angle and it wouldnt go at first but i finally got it.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top