Thread: w10 DET wont start in 96 B14 SE-R

found the reason why my car wouldn't start!

it was the JWT ECU that i just got repaired and reprogrammed.

i put in my stock b14 ECU and it fired right up?

any idea why my JWT might be causing this?

yes(technically no but I would do things the right way)
not sure
and you have a huge leak without that.

You need that crank angle sensor plugged in. Need more info than just not starting. Does it crank?

Pretty sure it should start w/out the stuff you listed. Double check all the basic stuff needed to start

I didn't have IC piping in when we did first start and it ran. We had a lot less hooked up than you too. No vacuum lines or brake booster

thanks everyone for the help... updated****

car cranks and seems to start for like literally a sec or less... i'll try and get a video up

bump

bump

Tell us everything you have installed and hooked up

everything i got is listed above... everything is hooked up minus CAS, hot side IC piping, Radiator and Fans, and the Brake Booster to Intake Mani vacuum hose

IMO the problem is withe the crank sensor..., the IC piping sould be conected but without it the car should at least start and iddle, when I blew a coupler the car would at least start and kinda iddle...