Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: t3/t4 setup ??

+ Reply To Thread
Posts: 11-20 of 21
2008-01-31 02:36:26
#11
Keep it nice and simple Tunnel. Get some 550cc Sard or Nismo side feed injectors, Z32 Maf, Walbro 255 high pressure pump, Nismo FPR.

I wouldn't really recommend 300whp on a stock DE. Many people have done it but in my opinion that is pushing the DE. You can easily squeeze 260WHP with that T25 you have laying around using stock maf and 4 bar your 370cc injectors.
2008-01-31 19:15:48
#12
Originally Posted by MR.
Keep it nice and simple Tunnel. Get some 550cc Sard or Nismo side feed injectors, Z32 Maf, Walbro 255 high pressure pump, Nismo FPR.

that's the setup i had, except i was using msd 50's and an aeromotive fpr.
2008-02-01 02:56:30
#13
not much need for the high pressure 255lph pump, just the 255 will do.
2008-02-01 03:08:38
#14
Originally Posted by fro20
not much need for the high pressure 255lph pump, just the 255 will do.


huh? or are you trying to say a 190 will do?
2008-02-01 03:44:43
#15
Originally Posted by fro20
not much need for the high pressure 255lph pump, just the 255 will do.


forget high pressure...

this guy needs to go to high SCHOOL.

dude learn how to spell. this isnt 1337.com

2008-02-10 00:29:43
#16
well i took of that setup now cuz da manifold developed a crack and will jus be puting in a avenir kit..question is will da car run fine wit same ecu/370inj..b14 maf..even wit a smaller turbo instead of t3 turbo..
2008-02-10 00:52:01
#17
Yeah... it actually should run better.
2008-02-10 00:54:08
#18
54mm bored GTiR MAF and 550's if you don't want to mess with wiring...
2008-02-10 02:57:56
#19
Originally Posted by Keo
huh? or are you trying to say a 190 will do?



Nope, there are 2 walbro 255lph pumps, high pressure and regular. There is no need for the high pressure pump.

The standard walbro 255 will do fine.

I squezed 350rwhp out of my 50lbrs on 15psi on pump gas and 423rwhp on 109 nld on 20psi at 50psi base fuel pressure on the 50lbrs. Just could not rev past 7300rpm under 12:1afr
2008-02-11 15:11:29
#20
I have a de that made 313hp and 302ft with t3 t4, stock maf, 550 inj and stock ecu with afc. So it can be done, dont let anybody tell you any different.


+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top