Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: synapse engineering 40mm wastegate

+ Reply To Thread
Posts: 1-6 of 6
2009-09-16 19:31:03
synapse engineering 40mm wastegate
RacingWorks.com Synapse Engineering 50mm 40mm Wastegate

Has anyone on this forum used this.. I'm deciding between this or 38mm tial v band. It's hard to find real people reviews on this and not vendor reviews.
2009-09-16 19:49:35
I used a Synapse 50/40mm before and it worked great. Real nice having the integrated boost controller right on the unit. After swapping springs and adjusting the pre-load screw, I had no need for a boost controller.
2009-09-16 22:18:15
synapse makes good stuff. I was going to use that waste gate but decided to use the jgs tools unit instead because of the size.
2009-09-17 00:02:18
you better have space because that thing is a big son of a bitch
2009-09-17 00:03:53
i havent personally used the synapse unit, however if you take into consideration it has the intergrated boost controller, and by all means IMO a integrated boost controller is alot more accurate than a manual boost controller or a electric controller as it is working with the engines vacuum to pull the valve, so IMO the integrated is not only a reliable source for boost controller but it also saves you money on a boost controller which will run you a decent ammount of money if you get a good one, so not only do you get a wastegate but a boost controller, so it kills 2 birds with 1 stone
2009-09-17 00:27:19
I have the 40mm, and I love it. I have been able to change my boost levels as I wanted more power without having to deal with changing springs. I was so impressed I bought the synapse BOV too.I recommend them both.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top