Thread: Where do these lines go to

Okay this is the last step basically for me before I get this intake manifold on and its going in the car. I got the two lines that go to the TB blocked off, I know where the two heater hoses connect to now I just need to figure these out. My turbo doesnt use a water line so I don't need the one off the pipes back there so I need to block that off as well.






TIA
Alex

give me a call at 305-282-3643

Also dont block off the TB lines. The caps will blow out. What you need to do is loop it from one TB line to the other. There will be no stress on the end of the cap.

The caps that people put on are vacum caps and not coolant caps so they are not reinforeced for presure.

The first pic goes to the fire wall they are the heater hoses

The second and third pic you can clearly see that those go together. That to cool the oil.

Dre's right. I forgot you have an oil cooler. The two larger hoses are your heater core, like I told you. The smaller one in the first pic next to your water neck is for the turbo. Loop it to the other one like dre said. I capped mine and didn't have any problems, though.

oil cooler?!?! I need to get one of those now jesus haha. I never got one with the motor so idk where I can get one.

EDIT: I see that the line comes from the block to the turbo and connect, thanks DRE. What hose should be good for that heater hose?

also that one that I have capped off in the second pick is that okay?




Quick little thing i threw together