Thread: it´s safe to run 10psi on sotck maf in a blowthorough mode??

yesterday i put on my boost controller and run a couple of times at 10psi and the car felt so damm strong but i´m not sure if its safe to let it that way because mi stock maf, i know that the stock maf can handle 250whp using the drawtrogh but what about the blowthoroug??

i´m runing a t25 set up with a jwt ecu

I'm running 16lbs lol on a t28

10lbs you should be fine unless you got cams.

thanks man then i`ll let the 10psi

I'm running basically the same set up, but I'm draw thru, and running 12psi currently.

its fine, the stock maf is fine to run in blowthrough, my buddy has been running 9psi on his like that for well over a year, you will be fine.

great

blowthrough meaning puttin the maf through boost?

yes sir, trust me it runs fine, dont really gotta worry about blowing couplers, the throttle response is quite noticable, and you have no trouble running your bov open atmosphere

whata about boost leak through the maf?

your talking very very very little leak if any, the z32 maf's are the ones that have that issue but even those are usually very very small