Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo Timer Install Problem

+ Reply To Thread
Posts: 1-6 of 6
2009-02-11 22:21:22
#1
Turbo Timer Install Problem
I just bought a buddy club secu-timer for my b14 but when i turn my key to the off position the car cuts off and doesnt count down i want to know if theres anyone that has any idea how to wire this up, diagrams or anything would help ppl..thanks for any info
2009-02-11 22:27:14
#2
If wiring into the harness in the steering column the wires are different colors-

Constant 12v - White w/ Red stripe
Accessory - Blue w/ white stripe
Ignition - Black w/white stripe

If you are wiring on the firewall side of the connector that is under the steering column, the wires are located here.

Constant 12volt - Solid white
Accessory - White w/ blue stripe
Ignition - Black w/red stripe

i wrote it up, link can be found here

HOW TO: Wire up a turbo timer
2009-02-12 01:44:40
#3
Originally Posted by 2dr_sentra
If wiring into the harness in the steering column the wires are different colors-

Constant 12v - White w/ Red stripe
Accessory - Blue w/ white stripe
Ignition - Black w/white stripe

If you are wiring on the firewall side of the connector that is under the steering column, the wires are located here.

Constant 12volt - Solid white
Accessory - White w/ blue stripe
Ignition - Black w/red stripe

i wrote it up, link can be found here

HOW TO: Wire up a turbo timer



thanks ill try it again tomorrow but i believe thats how my brother wired it...ill double check it though in the A.M
2009-02-12 01:52:34
#4
I've had this buddy blub secu-timer for about 10 months now and had no problems with it. Use the write-up suggested above....I got a clear idea on how to install it. I used a s13 ignition harness kit for my p11 and it worked like a charm....plug and play!!!
2009-02-12 14:32:38
#5
Originally Posted by 818_99G20
I've had this buddy blub secu-timer for about 10 months now and had no problems with it. Use the write-up suggested above....I got a clear idea on how to install it. I used a s13 ignition harness kit for my p11 and it worked like a charm....plug and play!!!


ok well im gonna try this again today
2009-10-08 01:53:21
#6
Originally Posted by 2dr_sentra
If wiring into the harness in the steering column the wires are different colors-

Constant 12v - White w/ Red stripe
Accessory - Blue w/ white stripe
Ignition - Black w/white stripe

If you are wiring on the firewall side of the connector that is under the steering column, the wires are located here.

Constant 12volt - Solid white
Accessory - White w/ blue stripe
Ignition - Black w/red stripe

i wrote it up, link can be found here

HOW TO: Wire up a turbo timer


Do you have an updated link for that? The link doesn't work anymore...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top