Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: high idle

+ Reply To Thread
Posts: 21-29 of 29
2007-12-30 19:55:27
#21
Originally Posted by GSRMx
Yes, I discovered the leak a couple of weeks back when I did a pressure test. AAC valve was cleaned 3 months ago, just before puting the motor on the car, and the PCV is working, checked that when I did the pressure test.

have you checked the voltage of the tps? to make sure the tps within certain volts?
2007-12-31 10:09:16
#22
Originally Posted by GT2871RBLUBIRD
have you checked the voltage of the tps? to make sure the tps within certain volts?


Yes, It is adjusted to .56 or somewhere around there. I am almost sure that it is drawing in air from the vacuum box.
2007-12-31 11:01:16
#23
TPS should be around .4~.46v...
2007-12-31 14:28:34
#24
best way to check that is through consult right? calumsult has a guage for it doesn't it? or datascan, one of them.
2007-12-31 14:30:18
#25
Yep, that's the best way to go. All of the Consult knock-off programs have it, even the free version of ConZult.

C
2007-12-31 14:31:18
#26
I personally feel it'd be better for you to use calumsult. I don't agree with NDS's software. It's given me nothing but hell since I've used it, so I don't bother with it anymore. Calum's software does everything you need it to do.
2007-12-31 15:43:39
#27
Originally Posted by TeKKiE
TPS should be around .4~.46v...


Yes, per FSM that's the voltage, but you can raise it to .55 to get a better throttle response.
2007-12-31 16:01:17
#28
Originally Posted by GSRMx
Yes, per FSM that's the voltage, but you can raise it to .55 to get a better throttle response.


Personally, I noticed absolutely NO difference in throttle response, so I put it back to the FSM recommended setting. I notice better throttle response, by tightening the throttle cable, so there's hardly any slack whatsoever.
2007-12-31 18:43:59
#29
Originally Posted by TeKKiE
Personally, I noticed absolutely NO difference in throttle response, so I put it back to the FSM recommended setting. I notice better throttle response, by tightening the throttle cable, so there's hardly any slack whatsoever.


same here, when i adjusted my throttle cable, i adjusted it slightly to .55 and noticed nothing, then i adjusted it to .45 then adjusted my throttle cable and that made somewhat of a difference, as i had some slight slack
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top