Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Electrician Guru Needed

+ Reply To Thread
Posts: 1-10 of 11
2009-10-24 15:13:12
#1
Electrician Guru Needed
I need an electrician guru to rewire a cluster of a IS300 into a P11.. does anybody know of someone that can do it for me??
2009-10-24 16:52:52
#2
well u would need wiring diagram of each and just try to match the wires up,and make sure they are the same voltage..?
2009-10-24 16:58:03
#3
Anyone who can read an electrical schematic should be able to do it for you. rob has the right idea, although it's possible the gauge cluster from the IS300 is expecting a completely different type of signal for the speedometer/tachometer/etc. than what your P11 ECU is providing in which case it's going to be much harder to accomplish.

(On a side note, the IS300 gauge cluster is horrid.)
2009-10-24 19:55:46
#4
I was able to find the wiring diagrams for the P11 cluster.. here is what i found.








IS300 Wiring Diagram





2009-10-24 20:12:34
#5
Why would you want to put something like that in a P11?
2009-10-24 20:54:32
#6
Do it rob, I want to see it when its done. On another note does the white face cluster from a neo jdm P11 plugs & plays on usdm?
2009-10-24 21:31:40
#7
Originally Posted by David
Do it rob, I want to see it when its done. On another note does the white face cluster from a neo jdm P11 plugs & plays on usdm?


i think it does.. not sure do..
2009-10-24 21:51:15
#8
With those diagrams you're like halfway done.
2009-10-24 21:57:12
#9
found these 2 items that might help me greatly

http://www.dakotadigital.com/index.c...rod/prd127.htm

or

http://www.dakotadigital.com/index.c...rod/prd126.htm
2009-10-25 00:48:15
#10
You don't need an electrician you need a person with electronics knowledge.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top