Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Clutch fork flapping

+ Reply To Thread
Posts: 11-20 of 25
2017-01-05 05:26:32
#11
Make a photobucket account or use some other image hosting site
2017-01-05 06:42:01
#12
2017-01-05 06:43:19
#13
The fork held the bearing in place and seemed ok just wondering what you guys think.
2017-01-05 06:47:20
#14
If I'm seeing that correctly, it's def abnormally worn.. so be careful as it may break in the future.. I could send u that part of your not in a hurry
2017-01-05 07:32:23
#15
That'd be cool but I am in a little bit of a rush. I was hoping this on would be ok. Are the roll pins the only thing that holds the bearing to the retaining clips?
2017-01-05 07:42:19
#16
Originally Posted by Kyle
Originally Posted by b14
Thanks yea that's what I thought. I'm hoping it's just the clips. Will be removing the trans tomorrow since I have time. Thanks for the input. Are the clips something that's easy to find or is it something only Nissan would have?


Part number 30506-m8002. list price is $6.20



You need 2 of those clips to go on the bearing



Sorry maybe I read your question wrong.. as long as you have the clips you should be good
Last edited by lynchfourtwenty on 2017-01-05 at 07-43-22.
2017-01-05 07:45:23
#17
I'm worried it won't press evenly on the bearing which will likely result in premature failure

- - - Updated - - -

Got a pic from another angle?
2017-01-05 07:55:06
#18
Yea sorry maybe I worded it wrong. The roll pins at the top and bottom. Are those the only things that hold the bearing in place with the retainers?

- - - Updated - - -

I'm concerned with the bearing not pressing fully also.
2017-01-05 08:05:43
#19
2017-01-05 08:07:04
#20
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top