Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rattling Sound

+ Reply To Thread
Posts: 1-10 of 15
2016-09-04 14:09:48
#1
Rattling Sound
I have this P11 LSD Tranny with Competition Light weight flywheel and FX300 Pressure Plate, FX300 unsprung disc.

I am hearing a rattling sound when Im in Neutral. it will stop if I step on the clutch Pedal or the Tranny is on engage.

What is this rattling sound?


Sent from my iPhone using Tapatalk
2016-09-04 14:14:16
#2
Throwout bearing probably.
2016-09-04 15:23:27
#3
I had that noise with an fx500. Thought it was tob but when I broke the clutch to.bits and replaced it, the tob was reused and no noise on the new clutch
I think it's a cm thing. When you hear a clunk when you let off and apply gas, your clutch is about to fall apart
2016-09-04 23:32:51
#4
Rattling Sound
Originally Posted by Kyle
Throwout bearing probably.


Bearing of what?
2016-09-04 23:40:38
#5
If all the above are new items installed, like mine did i still had a rattling sound it went away after few days when installed all my clutch setup components , i knew it was same sound since it used to go away when i pressed the pedal it stopped doing the sound, ao give it few days if all are new if that clutch setup you have its used it probably will be a worn out throw out bearing going out , tob is the one the will seat in the tranny shaft moved by the fork or clutch arm
2016-09-05 01:48:54
#6
Rattling Sound
Originally Posted by ztunedsr20
If all the above are new items installed, like mine did i still had a rattling sound it went away after few days when installed all my clutch setup components , i knew it was same sound since it used to go away when i pressed the pedal it stopped doing the sound, ao give it few days if all are new if that clutch setup you have its used it probably will be a worn out throw out bearing going out , tob is the one the will seat in the tranny shaft moved by the fork or clutch arm


The pressure plate and disc are used. But the clutch bearing is bnew. So I have to replaced the bearing or I bought a wrong bearing?
2016-09-05 12:41:10
#7
OEM bearing? Koyo? Panasonic? Did you re use clips or secure new ones? Also what does neutral mean to you? Holding the clutch in? Or clutch out and the gear selector in neutral? one thing leads to what zen says. Another leads to what I believe may be wrong.
2016-09-06 04:48:03
#8
Rattling Sound
Originally Posted by Kyle
OEM bearing? Koyo? Panasonic? Did you re use clips or secure new ones? Also what does neutral mean to you? Holding the clutch in? Or clutch out and the gear selector in neutral? one thing leads to what zen says. Another leads to what I believe may be wrong.


Im using NGK Cluctch Bearing.

Neutral means clutch out and gear selector in Neutral. Thanks for the response.
2016-09-09 02:57:11
#9
Rattling Sound
Up


Sent from my iPhone using Tapatalk
2016-09-12 23:18:08
#10
Rattling Sound
Bump


Sent from my iPhone using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top