Hydro clutch help
I am working on my girlfriends p11. The clutch will not disengage from the flywheel.
The car recently had the clutch replaced with a clutch, flywheel, pressure plate that came out of my b14 a few months ago. The entire set up worked great and was stored properly for the few months it was stored for. Everything checks out visually. The TOB was replaced with a new Koyo unit.
I have pulled the transmission to make sure things were good after I put everything in. It all looks good.
I recently went ahead and replaced the slave cylinder as well as the master cylinder. The master was bench bled and the system has been bled to hell and back.
I am really stumped. The clutch pedal feels good, nice and still. I have adjusted the pedal height and free play as per the FSM. The slave moves the clutch arm for enough.
Here is a video of the salve cylinder moving the clutch arm.
Any help here would be great.
Thanks.
The car recently had the clutch replaced with a clutch, flywheel, pressure plate that came out of my b14 a few months ago. The entire set up worked great and was stored properly for the few months it was stored for. Everything checks out visually. The TOB was replaced with a new Koyo unit.
I have pulled the transmission to make sure things were good after I put everything in. It all looks good.
I recently went ahead and replaced the slave cylinder as well as the master cylinder. The master was bench bled and the system has been bled to hell and back.
I am really stumped. The clutch pedal feels good, nice and still. I have adjusted the pedal height and free play as per the FSM. The slave moves the clutch arm for enough.
Here is a video of the salve cylinder moving the clutch arm.
Any help here would be great.
Thanks.
Last edited by D-Unit121
on 2015-05-27
at 19-18-24.