Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Complete P11 6 Speed Swap Guide

+ Reply To Thread
Posts: 11-14 of 14
2013-07-31 13:32:00
DIY Short Shifter
Maxima guys have been shorting the shifter throw for a while now, by drilling a new hole and remounting one of the shifter cables.

All you need is a 5/16" clevis pin and a cotter pin. Both will set you back a whipping $3!

Measured and started drilling the pilot hole.

Getting the drill in there was a pain..

Drilled a 5/16" hole

Used a 5/16" clevis pin easily found at Lowes/Homedepot. Cut it down, since you don't need it to be 2" long.

Test fitting the hole and checking to make sure the shifter shifts fine without binding

I had to grind the arm slightly to get the arm to sit lower, painted it so it wouldn't rust. Other then that short shifter is done!

The shifter feels great, much better then before, and before I had solid metal bushings too!
Last edited by Vadim on 2014-09-28 at 21-37-19.
2013-07-31 13:32:00
Misc place holder
2014-09-28 21:37:48
Reuploaded all of the pictures
2014-09-29 07:08:02
Originally Posted by Vadim
Reuploaded all of the pictures

+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top