Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Ultimate 6 Speed Swap Thread...Parts/Instructions/Results!!

+ Reply To Thread
Posts: 381-390 of 485
2013-12-30 00:21:44
#381
Originally Posted by nsusammyeb
Only problem that I see with the DIY mod Vadim is that you're losing all your leverage and the shifter will be much stiffer.


It's fine honestly, but I have metal bushings instead of stock rubber. Plenty of people on other forums are doing this and it's just fine. Try it out, if you can, took me 5 minutes and well worth it.
2013-12-30 00:33:39
#382
Originally Posted by Vadim
Originally Posted by nsusammyeb
Only problem that I see with the DIY mod Vadim is that you're losing all your leverage and the shifter will be much stiffer.


It's fine honestly, but I have metal bushings instead of stock rubber. Plenty of people on other forums are doing this and it's just fine. Try it out, if you can, took me 5 minutes and well worth it.


I'll try it out, just not very keen on the short shifter feel if you know what I mean. I'd almost rather shorten the shifter itself.
2013-12-30 00:40:53
#383
Oh man I'm the opposite, on the p11 with the jdm center console the shifter was not tall enough, but short throw made a very nice difference in driveability.
2014-07-03 10:11:23
#384
Hello!

Im sorry for rebumping an old thread.

im planning on doing this swap on my B13 SR20VE

i already had purchased an specv 6 spd tranny which i believe is from an 03 but im not completely sure.

i have some doubts regarding the flywheel!

ive seen some flywheels on ebay for s15 but it claims that they are also compatible with s14 and s13 will those work as well?

this is the link for the part

Competition Clutch Ultra Lightweight Flywheel 1989 1998 Nissan 240sx SR20DET | eBay

im just trying to cut a lil bit of expenses because most of the parts i will have to import them from the states, im located in costa rica


2nd question!

Where can i purchase the shifting linkage and cables on the internet??

They are no where to be found ( used at least ) nothing on ebay

does any one here have one up for sale ??



3rd Question!

Could be a very stupid question but, will the axles from an automatic specv work??

or will the axles for an 6sp maxima or altima work as well??


Any light on these questions will be appreciated!
2014-07-03 20:41:17
#385
1 email the seller and ask him if it will work with your S15 6speed or email comp clutch with the model number and ask them if it will work with your 6spd. You can buy them new from courtesy nissan but it's going to be a pretty good chunk of change I think. U also need the spec V bell housing I didn't see you mention that in your post. I think it has to be manual unless they don't have a different part number for them.
2014-07-03 20:49:30
#386
Yeah i got the p12 bell housing on the "shopping cart" this swap its going to be expensive 😂😂💸💸💸💸
2014-07-03 23:48:40
#387
Because from what i understand the qr25 bell housing wont bolt up with the sr20ve right?
2014-07-04 00:39:14
#388
Originally Posted by YoRiKiRo
Because from what i understand the qr25 bell housing wont bolt up with the sr20ve right?


Yup you got it.
2014-07-04 12:06:35
#389
I have the spec v 6spd in my b13, pm me for details of what you need. A lot of the info on the web is not correct or misunderstood.
2014-07-04 13:37:42
#390
Originally Posted by se200
I have the spec v 6spd in my b13, pm me for details of what you need. A lot of the info on the web is not correct or misunderstood.


So post the correct information if it's misinformation.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top