Thread: The Ultimate 6 Speed Swap Thread...Parts/Instructions/Results!!

I have a spech clutch that I can measure for you....

That would be awesome if you could do that, thanks. What model do you have?

Which Spec-V axles to get....ABS or non-ABS?

Will ABS ones fit in non ABS hubs? If they do just get ABS ones incase you ever get a car with ABS. I'm going to be searching for ABS axles here soon for the P11, hopefully they will fit and work without any troubles.

If you dont have abs, id probably just get the non abs ones. I dont think it will really matter. The abs ones should still fit into the hubs and clear the knuckle just fine but if you can find ones without Id go that route.

As for the P11, I believe the abs ring locations are different on yours vs the B15 Spec V. I could be wrong but I thought I remember seeing pictures of the differences over on G20.net in a thread over there of someone doing the swap.

is there a way to use the B15 vss and wire it into my aem to possibly use the traction control sytem?

Ashton,
That is true, my P11 has no ABS due to a difference in the ABS rings.

I finally got an email from spec saying that the rwd det pressure plate is 49mm. That's 5mm less than the maxima PP I currently have, and should work just fine. I have a stage 3 rwd det PP on the way, and I'll post results once I get it installed.

Can someone be kind enough to post a pic of how the cable bracket attaches to the transmission please?

If you look closely on the bracket it says FRONT 1-1 near the bottom. That side faces the driver side of the tranny, and it bolts on from the same side.