Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Ultimate 6 Speed Swap Thread...Parts/Instructions/Results!!

+ Reply To Thread
Posts: 291-300 of 485
2013-06-02 23:12:37
#291
swap the midshaft from the b13 axle to the spec v axle.
2013-06-02 23:23:15
#292
Originally Posted by ashtonsser
swap the midshaft from the b13 axle to the spec v axle.


Which two axles do i need? Both green oem?
I'll have to go salvage yard hopping tomorrow. and Im running out of time for the convention.
2013-06-02 23:36:08
#293
I dont think it matters if its oem or aftermarket. I know Mark found that aftermarket axles on both worked perfect
2013-06-03 00:32:33
#294
Originally Posted by ashtonsser
I dont think it matters if its oem or aftermarket. I know Mark found that aftermarket axles on both worked perfect


Mark told me both OEM on facebook.
2013-06-03 01:59:05
#295
Mine worked with both oem axles. I think most of the driver side axles use the same spline count and size with the occasional that doesnt. I know mark was having a hard time finding one to complete his but he found an aftermarket that was the same size as his b14 aftermarket. Basically if you find axles with the same roller ball count on the inner cv joint you should be good. There are 3 ball joints and 6 ball joints from what ive seen.
2013-06-03 09:41:34
#296
Good luck getting the axle figured out. I used aftermarket axles
2013-06-03 11:49:12
#297
Originally Posted by klassickrican
Good luck getting the axle figured out. I used aftermarket axles


To make hybrids?
In what?
Which hubs?
2013-06-03 14:58:09
#298
Yes to make hybrids.
B13
B15 Hubs
I disroyed the first b15 axle trying to. whack the joint off.
Then bought another it used different bearing style.
Tried to swap out bearings and spline size was different.
Bought another B13 axle and got lucky the spline size was good.
It was a PITA..Some people got it on the first try.Again Good luck Bro
Last edited by klassickrican on 2013-06-03 at 15-00-34.
2013-06-04 22:56:16
#299
I talked to Tad and he's going to make a shorter mid-shaft for the OEM LH side B15 axle..
Going to take a while - about 4-6 weeks.
2013-06-05 00:10:24
#300
How about the issue with the bearings not seating on the hub?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top