Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: My stock block SR20DE Updated times!

+ Reply To Thread
Posts: 91-100 of 192
2015-12-31 23:16:17
#91
A dyno just recently opened here on Guam.. I would like to but I'll continue to tune at the track.


Originally Posted by SRB13
My bad.. It should have been "faster than 12.8".
Lets see how it goes. Any plans to dyno?

Sent from my LG-D850 using Tapatalk
2016-01-01 18:19:14
#92
So what cams did you end up using? JWT C3's or the BC cams?

and what were your old cams that netted the 12.8?
2016-01-02 22:37:21
#93
Originally Posted by Haulin200sx
So what cams did you end up using? JWT C3's or the BC cams?

and what were your old cams that netted the 12.8?


I installed JWT C3s with BC springs..
I had JWT S4s when the car went 12.8.
2016-01-02 22:46:45
#94
My stock block SR20DE Updated times!
Sick! Here comes 12.5


Sent from my iPhone using Tapatalk
2016-01-03 01:30:03
#95
Originally Posted by Haulin200sx
Sick! Here comes 12.5


Sent from my iPhone using Tapatalk


Ha ha.. I hope so.. But I'll be happy as long as it can get quicker than 12.8.
Thanks all for the kind words.
Last edited by TRUSE-R on 2016-01-03 at 01-31-48.
2016-01-03 19:48:53
#96
Those are some damn good times bro. I noticed you're using a high port DE engine; that says a lot bearing in mind the low port DE engines have a better head flow.

Your times are comparable to VE times; as a matter of fact some VE guys are struggling to trap a 12.8.

Keep up the good work.

Sent from my D6503 using Tapatalk
2016-01-03 22:54:36
#97
Originally Posted by karibah
Those are some damn good times bro. I noticed you're using a high port DE engine; that says a lot bearing in mind the low port DE engines have a better head flow.

Your times are comparable to VE times; as a matter of fact some VE guys are struggling to trap a 12.8.

Keep up the good work.

Sent from my D6503 using Tapatalk


Thank you for the kind words.. I also have a VE that was in my 200sx. It went 12.6. Here's a link to it:
http://www.sr20-forum.com/drag-strip/63937-guam-sr20ve-death.html
I have opted to go 2.1 with the VE.. It has been down for some time.. But hoping to get it back on the road this year.
2016-01-13 22:45:37
#98
https://youtu.be/-SjFN2-dL10

Did a 12.9 @ 102.4 during a test and tune last night. Best ET during the night was a 12.8 and fastest trap @ 103. Still trying to drop time.
Last edited by TRUSE-R on 2016-01-13 at 22-48-25.
2016-01-13 23:22:45
#99
Good run. You might need to add some port work to that head w/ custom IM, 90mm throttle and 4" intake to get the most out of those C3s! What headers are you running? Sorry if i missed it.

Sent from my LG-D850 using Tapatalk
2016-01-13 23:47:21
#100
Thanks for the comments and suggestions. I am running a HOTSHOT GEN 6 header. The car has gained 2mph.. it was consistently trapping at 100mph now it is trapping 102mph. I still have to adjust shift points and tune..

Originally Posted by SRB13
Good run. You might need to add some port work to that head w/ custom IM, 90mm throttle and 4" intake to get the most out of those C3s! What headers are you running? Sorry if i missed it.

Sent from my LG-D850 using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top