Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Doug Fab Fuel Rail's!!!

+ Reply To Thread
Posts: 91-100 of 132
2014-02-18 22:44:35
#91
it very well may be the dampner. haha. I grabbed whatever was available in the shop and also what wasn't leaking. I had a couple regulators that where leaking during PSI test. this one has been holding tight!

good eye!
2014-02-18 22:49:04
#92
-6 AN in/out for external regulator use
MSD/Precision



2014-02-21 03:33:13
#93
got my rail and id1000 today and a sweet 2x t shirt thanks doug cant wait to get this going soon
2014-02-21 03:43:02
#94
Cant wait for my stuff!
2014-02-21 04:25:36
#95
So the final version of the rails you just finished clears the ve iacv only with ID1000 or with MSD/precision style injectors also?
2014-02-21 14:31:13
#96
Originally Posted by tomas527
So the final version of the rails you just finished clears the ve iacv only with ID1000 or with MSD/precision style injectors also?


it will only clear ID1000.

If you want a rail for msd/precision it will clear with use of a thermal spacer between upper + lower intake. so you actually gain a little performance with the spacer and are able to keep IAC in stock location.
2014-03-08 16:08:26
#97
Anyone who I have talked to about a rail!

I have a list together with everyone on it.
I am starting a new batch of rails very soon.

If you are waiting for one or are interested in one please post or pm me just so I know I have you on the list.
Don't wanna forget anyone!!!

Thank you!
2014-03-08 16:21:46
#98
how much for the intake spacer?? what brand??
2014-03-08 16:28:14
#99
Originally Posted by TREYDEE
how much for the intake spacer?? what brand??


i have 2 left in stock. they are $35 shipped.

they are no name. about 1/8" thick

I am actually going to producing my own thermal gaskets soon.

Making them out of Teflon they will be 1/4" thick. there will be a 3 piece set, to replace tb gasket + plenum gasket + intake manifold gasket

Keep a look out for these. they are in the process but need to test them to make sure they work like they are suppose to.
2014-03-09 08:38:04
#100
Originally Posted by Doug
Originally Posted by TREYDEE
how much for the intake spacer?? what brand??


i have 2 left in stock. they are $35 shipped.

they are no name. about 1/8" thick

I am actually going to producing my own thermal gaskets soon.

Making them out of Teflon they will be 1/4" thick. there will be a 3 piece set, to replace tb gasket + plenum gasket + intake manifold gasket

Keep a look out for these. they are in the process but need to test them to make sure they work like they are suppose to.


i highly recommend providing hardware for these things.. when i did my spacers i almost didnt have enough room to bolt everything down, luckily i had some longer bolts layin around lol
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top