Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: calum basic ecv - ve setup question

+ Reply To Thread
Posts: 1-4 of 4
2009-07-23 03:01:12
calum basic ecv - ve setup question

i was just wondering on a ve basic set up what are the timming settings. This is because i am using a ve basic set up with 370cc injectors and a vafc and have 7-10% correction and i have a 12.5 air fuel ratio. I have the distributor retarted a bit i dont feel any spuder it revs freely and smooth,


2009-07-23 06:35:40
Distributor timing should be at 15 if you use a Calum VE bin
2009-07-23 21:47:44
i have it set to 0deg right know just to be safe. and know is that 15 all they way through the revs, cuz when i rev it it goes way past 15deg
2009-07-23 23:29:52
I currently have this set up and am at 19 degrees. No pinging as of yet but I also use 93 octane every refill.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top