^ The inner and outer tie rods are different but the overall length is the same in the end.
So when we 1st got the steering rack and took it out and saw that it was slightly different, there was cursing involved because we thought we got the wrong one. Yes it hooks up ever-so-slightly differently but we obviously had the 200sx SE-r one for years in our b13 and the actual b13 one bolted right up correctly!
I don't know if the NX2000 would be different though (doesn't make sense that it would be but I can only confirm the b13 sentra for us)
Here they are side-by-side for a photo. We measured and remeasured 3x and although the tie rods are indeed different, the length does end up being the same.
I would also advise contacting Rich at RackDr about your old b13 SER one btw.. he seems to need/want cores so he might offer to buy it from you if its a rebuildable core
So when we 1st got the steering rack and took it out and saw that it was slightly different, there was cursing involved because we thought we got the wrong one. Yes it hooks up ever-so-slightly differently but we obviously had the 200sx SE-r one for years in our b13 and the actual b13 one bolted right up correctly!
I don't know if the NX2000 would be different though (doesn't make sense that it would be but I can only confirm the b13 sentra for us)
Here they are side-by-side for a photo. We measured and remeasured 3x and although the tie rods are indeed different, the length does end up being the same.
I would also advise contacting Rich at RackDr about your old b13 SER one btw.. he seems to need/want cores so he might offer to buy it from you if its a rebuildable core
Last edited by Chris101
on 2016-02-02
at 00-47-34.
Back to top
