Thread: B13 Addco Rear swaybar installation

Ok I have the tabs yes. The bar after mounting reaches under the struts, rather than turning sideways like the oem bar. The whole thing is odd if it's not meant to go on this way, I got no freaking clue

I dunno what bar fan means.

http://www.nicoclub.com/FSM/Sentra/1994_Sentra/ra.pdf

That brings up the PDF to arrange the suspension as OEM, simply replace the old bar with the Addco bar.

Here are the install instructions per Addco via there website. http://addco.s3.amazonaws.com/wp-content/uploads/2012/03/693.pdf

The bar is (supposed) to be Addco stock #693 if correct.

To reply to your new photos. It does not even look like it will fit.

Going back on my txts Justin claimed rear adco swaybar. F. Further ripped off then?

Looks like a st bar to me. Hope this pic helps with your assembly.

So it's installed right then? That looks like how I installed mine...or no?

I'd flip the end link bolt so you get clearance up top and angle it correctly so the bushings compress evenly... And I'd get new bushings.

Def not an addco bar

Sure looks like a lotta clearance. I wonder why mine has almost none!

Did some researching, here's some numbers if anyone cares:
front : P# 7.5115R
Nissan 28MM FRT SWAY

rear : P# 7.5116R
Nissan REAR SWAYBAR

And if you want to simply replace the bushings,

A third brand is introduced? Wonderful!

Here is the install instructions for the third brand mentioned, Suspension Techniques.

http://www.stsuspensions.com/extras/docs/DGBT/51105%20%28Nissan_91-94_Sentra+_Rear%20ASB%29.pdf