Thread: TDMi 5 Lug conversion Kit looking for info on b14/ possibly demo car!!

Hi folks ,

I would like to intorduce our unique 5 lug conversion kit for b15, however the other days I was told by a Nissan tech that b15/b14/b13 share the same knuckle. Especially b15 2.5l share the same front hub as b14/b13 Se-r. These information, I haven't really got myself confiremd yet so if anyone knows please let us know. If everything will fit without no issue, the 5 lug conversion could really help out sentra community in brake/wheels selection in the current market. Once the information if has been confirmed then I will be looking for one b14 car to rep TDMi on our kit. Anyone up for game please let us know, I will update further info later on.

Our kit doesn't require drilling/extra modifcation. So far non of aftermarket company would really provide this kit except us.

One of our vendor demostrate/feedback om our kit
TDMi 5 lug install






This is one of our customer car check it out
[img][IMG]http://i59.photobucket.com/albums/g320/kayzie_da_fly/IMG_2972.jpg[/img][/IMG]


thanks,
Steven

Yes it will work. I have b15 spindles and hubs on my car.

The b15 knuckles can work on a b13/b14 but you have to use the P10/P11 or B15 axles due to the spline size.

Also as far as using the b15 hubs into the b13/b14 knuckle, they use the same size outer diameter bearing but the the b15 bearing is wider by a good 5mm or more. So to get them to fit you would have to machine down where the bearing mates against the inner part of the hub which is what im doing to mine when I install my b15 hubs.

Now if you were to make a 4X100 hub for the B13/b14 knuckles that accepted the larger splined axles of the B15's and used the b13/b14 wheel bearing I would buy a set off you in a heartbeat to avoid having to get the machine work done to machine the knuckle and to redrill the hub to 4X100.

This is the truth right here. I would buy a set as soon as they were done.

This woold make the 6 speed B13 conversion simple

B15 1.8s and 2.0 are direct bolt in.

That we already know, but they are not 4x100.

this is why i said my comment.

has anyone tried to use b15 hubs with b13/14 spindles? the b15 bearings are wider b/c they are a sealed bearing. i wonder if its the same width of the b13 seal/bearing/seal combo?

Sweet, thx for the input guys I am in the process finding out the questions. Also, there is not need to make 4x100 wheel hub. It defeats the whole purpose. Our goal is trying to provide a 5 lug kit here.

So far, we need to get understand here. B15 has three different models, 1.8,2.0,2.5. Remember, these three models all share the same bearings/knuckles. The reason, I brought this up because everybody keeps mentioning b15 but not specific to which model. However, I am still curious if we can use 2.5 hubs bolt on b14/b13 se-r front axles?
i was told 2.5 b15 hub will work on b14 se-r model.
A quick pic here, myself in a pic. We got one of our b15 hub pressed in with our TDMi brand new 5 lug hub here :d