Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ADV22 Brake Question?

+ Reply To Thread
Posts: 11-14 of 14
2012-01-21 15:40:39
#11
Originally Posted by Chriscar
When buying the Maxima or P10 rear calipers, you need to make sure you get the parking brake cable bracket as well.

C


If you get them from the junk yard they'd already be on there. They don't com on new ones though? I've never bought new, so IDK?

Originally Posted by btsr22det
Tswii...........thanks for clarifing. Which M/C do i get for the Maxima setup? 95-98 Altima with ABS or w/o ABS


What Chris said below. If you have non abs now it'll look almost identical to yours.
ABS

NON ABS


Originally Posted by Chriscar
ABS masters have 2 ports, non-ABS have 4. So if your car has ABS, you need an ABS one, etc.

C


What Chris said again. Just look at the pics.
2012-01-21 16:19:08
#12
Originally Posted by tswii
If you get them from the junk yard they'd already be on there. They don't com on new ones though? I've never bought new, so IDK?
Nothing is guaranteed when buying rebuilds, so unless they specifically state that the bracket is included, your more likely to get them on loaded or semi-loaded calipers than unloaded calipers.

C
2012-01-21 17:35:27
#13
Jus got back from junk yard and compared rotors n calipers, ABS &Non ABS both have same size rotors. So i just swapped M/C for the one that matched my SE-R which is non ABS. I'm just gona run ADV22's front and stock SE-R rears w/ NX M/C.
2012-01-22 11:22:28
#14
Originally Posted by tswii
^^^No, actually not. USDM is setup for 234mm. JDM, and EDM is 258mm....


Thanks for correcting me. What I said was incorrect.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top