Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Calling B13s that are LOW...

+ Reply To Thread
Posts: 111-120 of 137
2011-12-20 20:04:46
Originally Posted by blackwater32

^ slammed

I am a real ricer.
2011-12-20 20:24:45
Back on topic, from personal standpoint, I think the BEST way is to get shortened axles in the front and correct offset wheels in the rear if you must have an even look between front and rear. You can just swap axles when you want to raise it. Or you can get an extra sets of arms, but then your swapping arms..etc. It would be nice if we can all find out and share at some point, which axles out there are shorter and will fit our cars!

Off topic. Don't you guys get it? some of the people on these forums are very close minded and opinionated to what is "correct" and what is "wrong" If you do something they don't like, they will post and you guys will be battling each other forever. You can debate on car stuff forever. I don't think there's an absolute way of doing something, as long as you can achieve what you want. It's pretty much how creative you are to get something to work. If everyone were so close minded, our auto aftermarket would suck! There would be no camber kits or coilovers. Everyone would lower their car to 1" max or whatever we think the BEST, PERFECT ride height is.
This is just lowering your car, imagine if you have an environmentalist in here. All you guys with aftermarket exhausts or even stock exhaust are polluting the earth....
So in the end, like we all said, it's our choice and we can all opinionate, so lets please answer a thread or don't answer to keep a thread on topic.
2011-12-20 20:45:29
I'll show you slammed, for weigh in the highest point of the flat bottom was less than 1.5" off the ground. You're not slammed until you have to cut 3" out of each fender

2011-12-20 21:11:14
^^ Now that's SLAMMED!
2011-12-20 21:51:11
^^WTH...I obviously don't get around the site or internet enough. That doesn't look photo shopped. A race spec B13 to the extreme?
2011-12-20 22:13:28
Originally Posted by morgans432
oo no dont do that we really want to see your amazing work

What is funny is that neither hmong nor myself could figure out who he was addressing or what he was trying to say. .......

As for all the Polite Police pontification on what should or should not be in a post or exactly how I should help folks? I've posted more links and been more help to hmong and dbphillips than any of you. As far as I can tell, we worked things out, hmong and I are just fine, no thanks to any of your unnecessary and overly protective kumbaya, peace-on-earth commentary.
2011-12-20 22:27:51
2011-12-20 22:28:37
Originally Posted by Ulysses

dude is that driveable?
2011-12-21 01:19:21
Originally Posted by blackwater32

^ slammed

LOL just noticed Ronald in the background all excited about seeing your car, either that or he is shocked at how "slammed" it is.
2011-12-21 01:22:38
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top