Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B14 Bushings/Joints

+ Reply To Thread
Posts: 21-23 of 23
2010-10-15 14:02:10
#21
Originally Posted by sr20b14jerban
Another good bushing is the ES rear trailing arm bushings. There are cheap about $60 but not so easy to put in. But they feel awesome once there on the car.

Is the B14 rear trailing arm bushing different from the B13 rear trailing arm bushing?

http://www.sr20-forum.com/suspension/1801-b13-b14-b15-suspension-information.html#post24089

I am no expert, but Suspension Bind is a real issue as discussed by Steve Foltz, Mike K, and BenFenner.

Originally Posted by Rodrigo
Yes sir , i had replaced all the bushings in my car about 5 years ago and just last year i replaced the panhard bushing in the rear and that made it feel like new.

i need to re do the front cause i had them all replaced with oem instead of polyurethane and now they are shot.

Nissan OEM rubber bushings? I did not *think* they were available as seperate items from the actual Nissan "hard part." I *thought* they were integrated. You want new Nissan control arm bushings, you have to buy the whole control arm which includes the bushings.

Am I mistaken?

Originally Posted by sr20b14jerban
Just go to energy suspension website and order them. I have replaced most of those bushings with energy suspension bushings on my b14. You should also replace the rear trailing arm bushings they feel good but are a pain to get out.

Once again, same questions as above....Suspension Bind?

Steve F and Mike K both state to leave that specific rear trailing arms bushing set alone, leave it factory rubber on the B13. That may be very different on a B14....?

Shawn B
2010-10-15 19:17:23
#22
Originally Posted by s132nr
ok cool.
imma get all those including ES endlink bushings from jgy which that energy suspension site didnt list. just a question about the sway bar bushings. its says you have to measure the front sway bar to get the correct size bushing. does anyone know the stock front b14 sway bar size or which bushing i would need from this list. It has some that are greasable and some that arnt which i take i want the ones that arnt.
heres the list. If someone could tell me which one i need with the matching part number for my b14, it would be great appreciated
heres the link
FrontSBB Front Sway Bar Bushings
just click learn more next to size


Check your phone.
2010-10-17 19:42:52
#23
Originally Posted by Shawn
Is the B14 rear trailing arm bushing different from the B13 rear trailing arm bushing?

http://www.sr20-forum.com/suspension/1801-b13-b14-b15-suspension-information.html#post24089

I am no expert, but Suspension Bind is a real issue as discussed by Steve Foltz, Mike K, and BenFenner.


Nissan OEM rubber bushings? I did not *think* they were available as seperate items from the actual Nissan "hard part." I *thought* they were integrated. You want new Nissan control arm bushings, you have to buy the whole control arm which includes the bushings.

Am I mistaken?


Once again, same questions as above....Suspension Bind?

Steve F and Mike K both state to leave that specific rear trailing arms bushing set alone, leave it factory rubber on the B13. That may be very different on a B14....?

Shawn B



B14 is a different suspension and don't have suspension bind like b13.To my knowledge I don't have suspension bind. So I'm pretty sure the bushings are different between b13 and b14. When I installed the rear trailing bushings on my b14 I noticed a difference. The rear felt more connected and responsive. I would definately recommend any b14 guy to replace that bushing. Hope this answers your question Shawn.

Jeremy
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top