Thread: Whiteline LCA Brace Question

^I'm going to get up under there and think of what I can do so that it's not resting on the flex, or anything for that matter. That sounds like a good idea swiss. The brace is amazing. Go-Kart response turning on 257K blown OEM shocks/springs running 205/40/17's is very very impressive results. I noticed the handling improvement immediately.

Hey all,

I have a 98’ Integra VTi-R and i’m planning to fit ITR shocks with the mandatory ITR LCA’s. My question is… if I were to get a rear sway bar from Whiteline would I need to order one for a VTi-R or ITR as I will have ITR LCA’s fitted.

Cheers,
emman
__________________________________________________________________
dom lindars
play sonic rpg eps 8

Emmanuel, wrong forum.
Also, mostly off topic.

Dumb question, but does this brace fit NX2000?

The NX2000 is a B13 so........

I just need to know where to get the RNN14/RNN15 whiteline brace. The B13/B14 one I have hugs the flexpipe to much. I don't want it touching it at all. It rattles like a can. I know heat wrap would help, but it's not enough. Zer099, where you at?

i have a cusco lca and it clears my 3in dp.. barely..

^You got picks? I'm looking for more options.

These things are awesome!!!!


BUT

be prepared to destory your bushes if you use them on the street. I found my LCa bottomed out - and bent and destroyed my bushes. Casued creaking and knocking from the Control arms...

In saying that - the response and mid corner grip is amazing!!! If you have access to a hoist - you can knock up your own easily and make it a custom fit for clearance!!!

^They work very well. I didn't have any knocking problems, just the vibrations from it resting on the flexpipe. That is the only reason it is not on my daily driver.