Thread: Maxima/p10 rear brakes

Just need clarification;
for b13 you use 91-94 maxima calipers/pads Or p10 calipers/pads, jdm nx rotors. Then it's all bolt on. Albeit one mm bigger then nx fronts (I have now). For master cylinder you can use the nx or get a altima correct. I've been searching and this info is not written down in one spot. Just bits and pieces of what u need everywhere.

And will nx wheels clear the brakes?

91 to 94 Maxima calipers bolt onto the rear of a B13. Make sure you get complete brake assemblies including torque members and parking brake brackets everything is different.

Nissan rotor is 43206-54C01 258x9 mm.

I have gotten the rotors from NAPA they were available overnight from the local wharehouse. Just get the biggest rear disk they list and it should be the correct one they list the sizes in inches so just convert the above dimensions.

I am running the Altima master cylinder and like the feel, nice and high and hard on the pedal. It should also work with the original, try it if you have too much travel then upgrade the MC to the Altima one.

The NX wheels clear fine, I use NX wheels for my snow tires.

Great I work for advance so i'ma see what this is gonna cost I need a new caliper now anyway.

I also would recommend going to the Altima m/c. I didn't like the feel with bigger front (ad22) and rear (p10) calipers on the stock m/c in my SE-R when I was running that setup.