Thread: Heims Joint for the front sway bar!

okay, I wanted this to help with the wheel hop. I didn't want a complete sway kit and the Progress front hardware kit is kinda pricey ($120). I searched around for awhile and I found something that may work. I ordered a set and will post up pics when it gets in.

if you guys don't think this is worth it, please let me know why!

TIA
Keo

This is the actual picture of what I ordered.


Front Progress sway installed on a B13

Heim joints yo!!

So, you're going to install the adjustable rod-ends on a stock front bar? To reduce wheel hop? Don't think that'll make any difference, sorry. Hell, lose the front bar altogether!

A front lower control arm brace helps though.

_SHig

thanks for the correction and advise, sucks that I already have one coming in

People usually get the urethane suspension bushings to help out with wheel hop. Also harder motor mounts.

already have both, I'm not dealing with wheel hop it yet. I figure since I'm here I might as well eliminate everything possible.

Traction bars FTMFW

everyone I've sen are a bit big, so I'm in the process of making my own.

Where did you get these?

Yea ..where ?

it's custom made