Thread: Suspension Help

Allrite so today I noticed that the top of my passenger side strut is leaning a little bit inward (toward the engine bay) but the drivers side is still in the middle. I was just wondering if anyone has had this problem or if someone knows that could be causing that. Im going to look into it more I just figured I would get everyones opinion 1st. Thanks everyone in advance for your inputs.

Looks like the insulator bushing in the passenger side strut mount collapsed. If you replace the strut mount on that side it should fix that.

I concur, Get the OEM ones and avoid the kyb ones

Strut Bearing, Front, OEM Strut bearing for front suspension **Priced EACH

^I ordered two strut bearings a while back as my stock ones were about done for, but what about the strut insulators? Do they really make a big difference in noise control? I have to do the 1/2" hose mod on my hypercos and noticed these were shot.

Strut Gasket, (Fr or Rr), The gasket that goes in between the strut and the body of the car. **Priced EACH

^Strut Insulator/Gasket link here.

They are talking about this:
Upper strut mount. This is the insulator that has the rubber in it to keep vibrations from the body.