Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Fastbrakes 11.75" 4 piston kit?

+ Reply To Thread
Posts: 1-10 of 11
2009-12-12 01:48:24
#1
Fastbrakes 11.75" 4 piston kit?
How many members running this setup on a B13?
Trying to see if the new 15x9 6UL rims from 949 racing will clear
without spacers in the front.91 nx2k btw....
I was told the 15x8's will not clear.
2009-12-24 18:40:09
#2
You need a 16" or bigger wheel to clear the 11.75" kit. I have the 11" kit with 15x7 Kosei wheels and I can't get my finger in between the barrel of the wheel and the top of the caliper. The 11" kit is more than you need, trust me. If you get the 11" kit then you can get those ballin Nickel finish 6UL wheels, I may have to sell my Kosei wheels for those.
2009-12-24 18:45:43
#3
The 11 inch kit actually has more surface area as compared with the 11.75 inch kit. This is from my research, lock up on the streets is very likely with any of these brake kits.
2009-12-24 19:09:42
#4
not sure if this will help any, but i'm running the 11.75" kit and 15x8 6ul +36 offset without any spacers on my b14. it barely clears the top but has lots of space in front of the caliper. when i had the 11" kit there was more room on the top side, but the front barely cleared.
2009-12-24 19:18:21
#5
I just located the LIST of fits and no go's:

11.75" List
Team Dynamics Pro Race 1 15x7 +30
Team Dynamics Pro Race 1.2 15x7 +30 and +35
Volk TE37 15x7 +35
ATS Comp Lite 15x7 +35
949 Racing 6UL 15x8 +36 with a 5 mm spacer

11.00" List
Rota C8
Rota Grid
Rota Subzero
Kosei K1
949 Racing 6UL 15x8 +36

Black flag list (those already tried and guaranteed to not fit)
Enkei RP02 15x7 +35
Enkei RPF1 15x7 +35
Rota Slipstream 15x6.5 +40
Rota GT3 15x7 +40
Rota AutoX 15x6.5 +40
Rota RB 15x8 +35 (probably the 15X7 too)

Looks like the 15x9's will work but you will need a spacer.
2009-12-24 19:28:17
#6
Originally Posted by iczer200sx
not sure if this will help any, but i'm running the 11.75" kit and 15x8 6ul +36 offset without any spacers on my b14. it barely clears the top but has lots of space in front of the caliper. when i had the 11" kit there was more room on the top side, but the front barely cleared.


I have this same setup on my B13, and I needed a 5 mm spacer to clear. There was definite interference without the spacer.
2009-12-24 23:21:01
#7
15x9 on a nx ?

with what rubber bands for tires ?

id like to see some pics ??

stratton.
2009-12-25 00:47:13
#8
I'm already running these below.

11.75" 4 piston setup.
Team Dynamics Pro Race 1 15x7 +30
.

^Like i said before stratton.....i'm always willing to try something different.
Trying to run at least a 225 tire setup in the front.
205 series tires don't cut it for me anymore.
2009-12-26 20:39:00
#9
tell me more about the seat rails, i wouldnt mind a lower sitting position.

always loved the sitting on the floor feel my buddys dumped crx had.

stratton.
2010-01-20 03:40:43
#10
you can run the 11.75 with spacers why are we beating this dead dog to death.. this has been done may times over
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top